%% Kluwer Small Journal Article Template File 
%% Current version: November 29, 1995
     
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% 
%% Prepared by Amy Hendrickson, TeXnology Inc.                          %% 
%% (617) 738-8029                                                       %% 
%%                                                                      %% 
%% Inquiries to Suzanne M. Rumsey, net address: prod@world.std.com      %% 
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
     
     
% Use one of these two commands: 
\documentstyle{kbsjrnl} % For Computer Modern Fonts, or,
% \documentstyle[kbsfonts]{kbsjrnl} % for PostScript fonts
     
\begin{document}
\begin{article}
     
     
%%%%% To be entered at Kluwers: =====>>
     
%% Enter each date on its own line, and write in correct dates:
   \begin{kluwerdates}
     Received Date
     Accepted Date
     Final Manuscript Date
   \end{kluwerdates}
     
\journame{}
\volnumber{}
\issuenumber{}
\issuemonth{}
\volyear{}
     
%% Do not delete either of the following two commands. 
%% Please supply facing curly brackets for the part you 
%% are not using for this article.
\received{May 1, 1991}\revised{}
     
\authorrunninghead{}
\titlerunninghead{}
     
%\setcounter{page}{275} %% Optional, uncomment to set page number. 
%%%%  <<==== End of commands to be entered at Kluwers 
     
     
%%  Authors, start here ====>>
     
\title{}
     
%% Author name 
\authors{}
     
%% Email address. Do not delete this command even if you do not have
%% an email address; just leave the command followed by facing curly brackets. 
\email{} 
     
%% Affiliation address
\affil{}
     
%% Article editor
\editor{}
     
%% Abstract
\abstract{}
     
%% Keywords
\keywords{}
     
\section{}
     
     
%% End matter:
     
% \acknowledgements
     
% \appendix{}
     
% \begin{references}
% \bibitem{xxx}
% \end{references}
     
%% Do not delete this! ===>>>
\end{article}
\end{document}
     
     
% Samples of commands you may use:
     
\section{ }
\subsection{ }
\subsubsection{ }
     
%% If you want to make an equation that is not indented, use 
%% \begin{wideequation} ... \end{wideequation}
     
% \begin{wideequation}
% \begin{equation} or \[
% <math>
% \end{equation} or \]
% \end{wideequation}
     
% In this wide equation the `array' command is used to split 
% the math into two lines, moving the top half to the left
% and the bottom to the right.
% \begin{wideequation}
% \begin{array}{lr}
% \sum_k P(k) \sum_i \sum_y f_i(y|k)^2\\ 
% &\sum_k P(k) \sum_i \sum_y f_i(y|k)^2 
% \sum_k P(k) \sum_i \sum_y f_i(y|k)^2
% \end{array}
% \end{wideequation}
     
     
% To indent text, use the following commands: 
% \begin{itemize}
% \item[] 
% text...
% \end{itemize}
     
     
%% Algorithm for exhibiting code. Indent lines with one or more `\ '. 
% \begin{algorithm}
% \ start line here
% \ \ indent line here
% \end{algorithm}
     
     
% Sample figure
% \begin{figure}[h]
% \vspace*{.5in}
% \caption{This is a figure caption. 
% This is a figure caption.
% This is a figure caption.}
% \end{figure}
     
% Sample table, this kind of table preamble will spread 
% table out to the width of the page:
% \begin{table}[h]
% \caption{This is an example table caption. As you can
% see, it will be as wide as the table that it captions.} 
% \begin{tabular*}{\textwidth}{@{\extracolsep{\fill}}lcr} 
% \hline
% $\alpha\beta\Gamma\Delta$ One&Two&Three\cr 
% \hline
% one&two&three\cr
% one&two&three\cr
% \hline
% \end{tabular*}
% \end{table}
     
%% Make examples:
% \begin{example}
% text...
% \end{example}
     
%% Make theorems:
% \begin{proclaim}{Theorem <number>} 
% text...
% \end{proclaim}
     
%% Make proof:
% \begin{proof}
% text...
% \end{proof}
     
% If proof ends with math, please use \inmathqed at the end of the 
% equation:
% \begin{proof}
% ....
% \[
% \alpha\beta\Gamma\Delta\inmathqed
% \]
% \end{proof}
     
%% Proof with a title. Enter name of proof in square brackets: 
% \begin{proof}[Proof of Theorem A.1]
% ...
% \end{proof}
     
%% Assumption or similar kind of environment 
% \begin{demo}{Assumption <number>}
% text...
% \end{demo}
     
%% End Matter:
     
%%%%%%%
%% Acknowledgements here
     
% \acknowledgements
% text...
     
% Appendices:
% \appendix
     
%%%%%%%
%% Endnotes
     
%\notes
     
%%%%%%%
%% Make references as standard Latex. 
%% for example:
     
%% Trying `cite', \cite{jacobs}, \cite{francis}.
     
% \begin{references}
% \bibitem{jacobs}Jacobs, E., ``Design Method Optimizes Scanning 
% Phased Array,'' Microwaves, April 1982, pp.\ 69--70.
     
% \bibitem{francis} Francis, M., ``Out-of-band response of array antennas,'' 
% Antenna Meas.  Tech. Proc., September 28--October 2, 1987, Seattle, p.~14. 
% \end{references}
     
% Or, to make alphabetical references, with no number preceding entries:
     
% Maude Francis, (Francis, 87) showed important new results 
% with array antennas.
     
% \begin{alphareferences}
% Francis, M., ``Out-of-band response of array 
% antennas,'' Antenna Meas.  Tech. Proc., September 28--October 2, 
% 1987, Seattle, p.~14.
     
% Jacobs, E., ``Design Method Optimizes Scanning
% Phased Array,'' Microwaves, April 1982, pp.\ 69--70. 
% \end{alphareferences}
     
See kbsjrnl.ins for documentation on using Bibtex,
also on making an alphabetical reference section using Bibtex.
     
     
     
     
     
