%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% Edited Book Template
%% Version 8/11/97
%% Kluwer Academic Press
%%
%% Prepared by Amy Hendrickson, TeXnology Inc., April 1996.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

%% Author using LaTeX2.09 may use:
% \documentstyle{edbk} % Computer Modern font calls

   %% LaTeX2e:
   %% Author using LaTeX2e in compatibility mode may use:
   % \documentstyle{edbk} % Computer Modern font calls

   %% Or, author using LaTeX2e may rename edbk.sty to edbk.cls and use:
   % \documentclass{edbk} % Computer Modern font calls


%% Final production only: ==>>

% Using LaTeX2.09 please use one of these:
%\documentstyle[edbkps]{edbk} % for PostScript text, Computer Modern Math
%\documentstyle[m-times,edbkps]{edbk} % for MathTimes and PostScript

  % Using LaTeX2e, you may write
  % \documentstyle[edbkps]{edbk} % for PostScript text, Computer Modern Math
  % \documentstyle[m-times,edbkps]{edbk} % for MathTimes and PostScript
  %  or, you may rename edbk.sty to edbk.cls and uncomment:
  % \documentclass{edbk.sty}
  % \usepackage{edbkps}
  % \usepackage{m-times}

%% <<== end Final production

% optional command:
%\draft

%% How many levels of section head would you like numbered?
%% 0= no section numbers, 1= section, 2= subsection, 3= subsubsection
%%==>>
\setcounter{secnumdepth}{0}


%% How many levels of section head would you like to appear in the
%% Table of Contents?
%% 0= chapter titles, 1= section titles, 2= subsection titles, 
%% 3= subsubsection titles.
%%==>>
\setcounter{tocdepth}{0}

%%%%%%% Bibliography Style Settings ==>>

%%% Uncomment one of the Following:
\kluwerbib
%\normallatexbib

%%%%%%%
% \kluwerbib will produce this kind of bibliography entry:
%
% Anderson, Terry L.,...
%   More bib entry here...
%
% \cite{xxx} will print without brackets around the citation.
%
% \bibliographystyle{apalike} should be use with \kluwerbib

%%%%%%%
% \normallatexbib will produce bibliography entries as shown in the
% LaTeX book
%
% [1] Anderson, Terry L.,...
%     More bib entry here...
%
% \cite{xxx} will print with square brackets around the citation, [1].
%
% Any \bibliographystyle{} may be used with \normallatexbib, but
% you should check with your editor to find the style preferred for
% the book you are contributing to.


%%%%%%% To change brackets around citation ==>>
% Default with \kluwerbib is no brackets around citation. 
% Default with \normallatexbib is square brackets around citation. 

%If you want parens, around citation, i.e., (citation), uncomment these lines:
%\let\lcitebracket(
%\let\rcitebracket)

%%%%%%%  <<== End Bibliography Style Settings

%%%%%%%  Footnote settings
%% Do you want a footnote rather than an endnote? Uncomment below:
%% (You may want to check with your editor to see if this is allowed)
%\let\footnote\savefootnote

%% Do you want a ruled line above the footnote? Uncomment below:
%\let\footnoterule\savefootnoterule

%%%%%%%  <<== End Footnote Style Settings

\begin{document}

%------------ article title  ------------------->>

% If you use \\'s , please supply an alternate version of the title
% in square brackets, i.e., 
%\articletitle[Communism, Sparta, and Plato]
%{COMMUNISM, SPARTA,\\ and PLATO}

\articletitle[]{}

%% optional, to supply a shorter version of the title for the running head:
%%\chaptitlerunninghead{}

\author{}

%% multiple authors may be separated with \\
%% \author{Samuel Bostaph\\
%% and Gregor Kariotis}

% optional prologue
%\prologue{<text>}{<author, year>}

% optional abstract
% \begin{abstract}
% text...
% \end{abstract}

%------------ body of article ------------------->>

%------------ end of article ------------------->>

%% optional
%\section{Summary}

%% optional
%\begin{acknowledgments}
%...
%\end{acknowledgments}


%% appendix optional
%\appendix{This is the Appendix Title}
%This is an appendix with a title.

%\appendix{}
%This is an appendix without a title.

%
% Bibliography made with BibTeX:
%% apalike is preferred if you have used \kluwerbib, above.
%% Otherwise you may use any .bst style your editor approves.

This will allow many Bib\TeX\ bibliographies in one book.
See the documentation, edbk.doc, for more information.

\bibliographystyle{apalike}
\chapbblname{<name of .bbl file>}
\chapbibliography{<name of .bib file>}

%or 
\begin{chapthebibliography}{<widest bib entry>}
\bibitem[optional]{symbolic name}
Text of bib item...

\end{chapthebibliography}

\end{document}

Other commands, and notes on usage:

-----
Possible section head levels:
\section{Introduction}
\subsection{This is subsection}
\subsubsection{This is subsubsection}
\paragraph{This is the paragraph}

-----
Captions:
 If you use index commands within a caption, precede \inx or \inxx with
 \protect.

\begin{figure}[h]
\caption{\protect\inx{Oscillograph} for memory address access ....
memory plane.}
\end{figure}

-----
Tables:
 Remember to use \centering for a small table and to start the table
 with \hline, use \hline underneath the column headers and at the end of 
 the table. Column headers should be in italic:

\begin{table}[h]
\caption{Small Table}
\centering
\begin{tabular}{ccc}
\hline
\it one&\it two&\it three\\
\hline
C&D&E\\
\hline
\end{tabular}
\end{table}

For a table that expands to the width of the page, write

\begin{table}
\begin{tabular*}{\textwidth}{@{\extracolsep{\fill}}lcc}
\hline
....
\end{tabular*}
%% Sample table notes:
\begin{tablenotes}
$^a$Refs.~19 and 20.

$^b\kappa, \lambda>1$.
\end{tablenotes}
\end{table}

-----
%% Use \printindex if you are using the LaTeX Makeindex commands:
%% \makeindex and \index{}
%\printindex

%% Use \kluwerprintindex if you are using the Kluwer indexing macros:
%%(\inx{} and \inxx{})
\kluwerprintindex

Kluwer Index commands:
\inx{term} will print `term' in text but will also send `term' and its
page number to the .inx file.

\inxx{term} will not print in text but will send term and its page number to
the .inx file.

\inxx{term,second term} will not print in text but will send `second term'
to inx file to print underneath `term' in the index.

1) Run Latex on file,
2) Run sort routine on file ie. `sort < filename.inx > filename.srt' on
your system to produce a filename.srt file
3)\printindex at end of book will input filename.srt and print index.

See documentation for more information.

-----
Algorithm.
Maintains same fonts as text (as opposed to verbatim which uses fixed
width fonts). Space at beginning of line will be maintained if you
use \ at beginning of line.

\begin{algorithm}
{\bf state\_transition algorithm} $\{$
\        for each neuron $j\in\{0,1,\ldots,M-1\}$
\        $\{$   
\            calculate the weighted sum $S_j$ using Eq. (6);
\            if ($S_j>t_j$)
\                    $\{$turn ON neuron; $Y_1=+1\}$   
\            else if ($S_j<t_j$)
\                    $\{$turn OFF neuron; $Y_1=-1\}$   
\            else
\                    $\{$no change in neuron state; $y_j$ remains %
unchanged;$\}$ .
\        $\}$   
$\}$   
\end{algorithm}

-----
Sample quote:
\begin{quote}
quotation...
\end{quote}

-----
Listing samples

\begin{enumerate}
\item
This is the first item in the numbered list.

\item
This is the second item in the numbered list.
\end{enumerate}

\begin{itemize}
\item
This is the first item in the itemized list.

\item
This is the first item in the itemized list.
This is the first item in the itemized list.
This is the first item in the itemized list.
\end{itemize}

\begin{itemize}
\item[]
This is the first item in the itemized list.

\item[]
This is the first item in the itemized list.
This is the first item in the itemized list.
This is the first item in the itemized list.
\end{itemize}

----
Glossary:

\begin{glossary}
\term{xxx}Text...
\term{yyy}Text...
\end{glossary}

i.e.,
\begin{glossary}
\term{GaAs}Gallium Arsinide. For similar device sizes GaAs transistors 
have three to
five times greater transconductance than those of of silicon bipolar
and MOS transistors.

\term{VLSI}Very Large Scale Integration. Since the mid-1970's 
VLSI technology has been successfully used in many areas, but its effect on
computers of all shapes and sizes has been the most dramatic. Some of the
application areas got boosts in performance while others became
feasible.

\end{glossary}







