% +--------------------------------------------------+
% | Typeset this file to get the documentation.      |
% +--------------------------------------------------+
%
% This file is copyrighted (c) 1998, 1999 by Javier Bezos.
% All Rights Reserved.
%
% This file is distributed without any warranty and specificallly
% disclaims any implied warranty of MERCHANTABILITY or FITNESS
% FOR ANY PARTICULAR PURPOSE. While the author firmly believes this
% to be a high quality package, the user must assume all risks of
% using it.
%
% NO PERMISSION is granted to produce or to distribute a modified
% version of this file under its original name.
%
% You are NOT ALLOWED to change this file.
%
% For further copyright information contact with the author.

\def\fileversion{1.1}
\def\docdate{February 24, 1999}

\documentclass{ltxguide}
\usepackage{accents}

\title{The \textsf{accents} Package\footnote{This 
package is currently at version 1.1.}}

\author{Javier Bezos\footnote{Please, send your
comments and suggestions to \texttt{jbezos@mx3.redestb.es}, or
to my postal address: Apartado 116.035, E-28080 Madrid, Spain.
English is not my strong point, so contact me when you
find mistakes in the manual. Other packages by the same author:
\textsf{tensind, polyglot, spanishb, titlesec, esindex}.}}

\date{\docdate}

\newenvironment{sample}{\begin{quote}\small\begin{tabbing}%
  \hskip14pc\=\hskip6pc\\}
  {\end{tabbing}\end{quote}}

\DeclareMathAccent{\wtilde}{\mathord}{largesymbols}{"65}

\raggedright

\begin{document}

\maketitle

This package provides some miscellaneous tools for mathematical 
accents, with the following goals in mind:
\begin{itemize}
\item Creating faked accents from non-accent symbols, like
$\accentset{\star}{s}$.
\item Grouping them, perhaps including actual accents, like 
$\hat{\accentset{\star}{\hat h}}$. That
has the side effect that multiple actual accents can be build
as well.
\item Putting them below the main symbol instead of above.
\end{itemize}

That is done so that the faked accents behave in quite similar fashion 
to actual accents do; i.e., the skew of the letter is taken into 
account (compare $\accentset{\ast}{d}$ with 
$\accentset{\ast}{h}$) and the sub and superscripts attached to 
it aren't misplaced (look carefully at $\accentset{\star}{f}_1^1$).

This release includes a few new features, some of them following 
suggestions by Donald Arseneau.  In particular, the |\underaccent| 
command has been fully reimplemented so that the slant is taken into 
account and the ``accent'' to be placed below the symbol can be 
anyone, not just real accents.

\begin{decl}
|\DeclareMathAccent|
\end{decl}

This \LaTeXe{} command is reimplemented so that newly defined accents 
will incorporate the features of this package.  The standard accents 
are automatically redefined, including |\mathring| if you are using 
one of the latest \LaTeX{} releases.  However, both |\widetilde| and
|\widehat| remains untouched.  If you are using a non standard 
math encoding, the accents following the standard encoding names are 
rightly redefined, but new accents are not converted because 
\textsf{accents} is not aware of its existence.

See |fntguide.tex| in the \LaTeX{} standard distribution for a discussion on
 |\DeclareMathAccent|.

\begin{decl}
|\ring{<symbol>}|
\end{decl}

The accent in $\ring{x}$, which was available in this package (and in fact in many others) before
the |\mathring| command was added to the \LaTeX{} kernel.

\begin{decl}
|\accentset{<accent>}{<symbol>}|
\end{decl}

Builds a faked accent, as for instance
\begin{sample}
|\accentset{\star}{d}|    \> $\accentset{\star}{d}$\\
|\accentset{\diamond}{h}| \> $\accentset{\diamond}{h}$\\
|\tilde{\accentset{\circ}{\phi}}| \>
    $\tilde{\accentset{\circ}{\phi}}$
\end{sample}
The |<accent>| is always in |\scriptscriptmode|; hence, using
|\accentset| in scripts won't give the desired  result. Of course,
if you use some faked accent many times through the whole document you may
define a command, say:
\begin{verbatim}
\newcommand\starred[1]{\accentset{\star}{#1}}
\end{verbatim}
and |\starred| will become an accent, like |\hat|, |\tilde| and so on.

\begin{decl}
|\dddot  \ddddot|
\end{decl}

Two prefabricated faked accents: $\dddot{f}$ and $\ddddot{f}$.

\begin{decl}
|\underaccent{<accent>}{<symbol>}|
\end{decl}

This command puts the |<accent>| under the |<symbol>|. Both real
and faked accents are allowed. For instance,
\begin{sample}
|\underaccent{\hat}{x}|      \> $\underaccent{\hat}{x}$\\
|\underaccent{\bar}{\gamma}| \> $\underaccent{\bar}{\gamma}$\\
|\underaccent{\triangleright}{q}|  \>
   $\underaccent{\triangleright}{q}$\\
|\underaccent{\tilde}{\mathcal{A}}| \>
    $\underaccent{\tilde}{\mathcal{A}}$
\end{sample}

Many people likes using the wider version of the tilde accent as 
printed by the |\widetilde| command, i.e., $\widetilde{A}$ instead of 
$\tilde{A}$.  I find that aesthetically questionable, but anyway it
can be used under the symbol as well. Since |\widetilde| remains
untouched, you should define:
\begin{verbatim}
\DeclareMathAccent{\wtilde}{\mathord}{largesymbols}{"65}
\end{verbatim}
and write |\underaccent{\wtilde}{V}|, say (giving 
$\underaccent{\wtilde}{V}$). You may build an accent with
|\sim| too.

Sadly, \TeX{} lacks of a mechanism to place underaccents similar
to that used in accents. Letters have a large variety of shapes
and finding an automatic adjusting is impossible. Compare for
instance the following letters:
\begingroup
\def\\{\underaccent{\bar}}%
$\\V$, $\\Q$, $\\p$, $\\q$, $\\f$,
$\\\beta$, $\\\gamma$, $\\{\mathcal{F}}$, $\\{\mathcal{A}}$
\endgroup
and you wil understand the difficulties.

\begin{decl}
|\undertilde{<symbols>}|
\end{decl}

This is the ``under'' version of |\widetilde| and like the latter is intended for constructions
involving several symbols. For instance:
\begin{sample}
|\undertilde{CV}| \> $\undertilde{CV}$
\end{sample}
Note that in this case no correction is made in the placement of the tilde.

\begin{decl}
|nonscript single|
\end{decl}

These options are intended mainly for speeding up the typesetting of document. The algorithm used here
is recursive and very slow; although in fast processors that is not felt, in slow system that could be very
annoying.

\begin{description}
\item[single] If you are interested only in |\accentset|.
 Accents are not reimplemented.
\item[nonscript] If you intend to use multiple accents in
 text and display modes only.
\end{description}

Macros are speeded up dramaticaly with both options; if your system is slow,
I commend using them in drafts and removing them for the final print.

Finally, some remarks:
\begin{itemize}
\item The package does not provides alternative accents for fonts
  lacking them. If you want an accented  |\mathcal| letter you had to
  write |\hat{\hat{\mathcal{A}}}| ($\hat{\hat{\mathcal{A}}}$).
\item |\mathbf{\hat{\hat h}}| gets the bold accent;
 |\hat{\hat{\mathbf{h}}}| not.
\item The symbol in |\accentset| must be a single symbol.
\end{itemize}

\end{document}

